27
First steps
Gigaset SX553 WLAN dsl / en / A31008-M1034-B181-1-7619 / device.fm / 27.06.2006
Te
m
plat
e 2005
_07_
27
When the device is ready for use, the LEDs light up as follows:
u
The
power
LED on the front lights up.
u
The
ADSL
LED flashes to indicate that the DSL connection is being synchronised.
Once this process is complete, the ADSL LED lights up permanently.
u
The
WLAN
LED lights up to indicate that the Gigaset SX553 WLAN dsl is ready to
establish wireless connections.
The radio link to a PC that is connected by means of a wireless network adapter is
opened automatically provided the network adapter has been configured with the
same SSID as the Gigaset SX553 WLAN dsl. It can take a few seconds for the wireless
connection to be established. The
WLAN
LED flashes when data is sent or received
via this connection.
u
The
LAN
LEDs light up if a device is connected to the corresponding LAN port.
If this is not the case, refer to the section entitled "Troubleshooting" on page 166.
Network configuration of the PCs
In order to communicate via the Gigaset SX553 WLAN dsl,
network configuration
must
be performed on the connected PC.
With
u
Windows XP
(see page 129) or
u
Windows 2000
(see page 138)
operating systems, this usually takes place automatically provided you have not made
any changes to the standard settings for the network configuration.
u
With
Windows 98/SE
you have to carry out the network configuration
(see page 146).
Making the basic settings
You can now make the basic settings for Internet access on the user interface of the
Gigaset SX553 WLAN dsl (see page 29).
If you want to connect additional PCs to the Gigaset SX553 WLAN dsl, please read the
next section.
Summary of Contents for Gigaset SX553 WLAN dsl
Page 1: ...Template 2005_07_27 First steps...
Page 2: ...II Template 2005_07_27...
