Gigaset Gigaset SX553 WLAN dsl First Steps Download Page 169

Page: 169 / 196

167

Appendix

Gigaset SX553 WLAN dsl / en / A31008-M1034-B181-1-7619 / appendix.fm / 27.06.2006

plat

e 2005

_07_

You cannot connect to the
Internet.

Check whether the

Connect on demand

option is

deactivated. If it is, connections cannot be opened
automatically.

Select

Connect on demand

. Remember that this

setting may lead to higher costs if you are billed on
the time used.

The connection may have been terminated manu-
ally with the

Connect on demand

option selected.

– Restore the connection again manually using the

Connect

button or

– restart the Gigaset SX553 WLAN dsl.
In both cases, the

Connect on demand

setting will

be active again.

You cannot open a connec-
tion from a wireless device
to the Gigaset SX553 WLAN
dsl.

The wireless network adapter is not using the cor-
rect SSID.

Change the SSID on the network adapter.

Either WEP encryption has been activated on the
Gigaset SX553 WLAN dsl but not on the wireless
network adapter or it is using the wrong WEP key.

Activate WEP encryption on the network adapter
with the correct key.
If you do not know the key, you will have to reset
the Gigaset SX553 WLAN dsl (see page 20).

Warning

: Please bear in mind that this will return

all

the configuration settings to the factory set-

tings.

WPA protection is activated on the Gigaset SX553
WLAN dsl but not on the wireless network adapter
of the appropriate PC.

Install and configure WPA protection on the PC.

Symptom

Possible cause and solutions

Summary of Contents for Gigaset SX553 WLAN dsl





































































































































































































Search results

Summary of Contents for Gigaset SX553 WLAN dsl

Reviews:

Related manuals for Gigaset SX553 WLAN dsl

Brands by name

Popular brands

Gigaset Gigaset SX553 WLAN dsl, First Steps

Search results

Summary of Contents for Gigaset SX553 WLAN dsl

Reviews:

Related manuals for Gigaset SX553 WLAN dsl

Brands by name

Popular brands