6
Making the handset ready for service
Gigaset A2 / gb / A31008-A002-B001-1-6Z19 / starting.fm / 23.07.2003
Making the handset ready for service
The pack contains:
◆
Gigaset A2 handset
◆
Power supply unit with power cord
◆
Two batteries
◆
Charger
◆
Operating instructions
Removing the protective
The handset display is protected by a film.
Please remove the protective film!
Inserting batteries
◆
Insert the batteries the
right way round
– see illustration left.
◆
Place the cover on the battery compartment
about 3 mm down from the latch
and
push it
up
until it clicks into position.
To open
the cover, press on the ridged section and push
downwards
.
Deactivating/activating the handset
To deactivate or activate the handset, press the end call key
a
.
Afterwards the confirmation tone rings (see page 9). If you place a handset that is acti-
vated in the base station or a charging unit, it will automatically be activated.
W
◆
Insert only approved, rechargeable
batteries of the same type
(page 19)! Never use normal batteries, since these could lead to a
health hazard or cause injury.
◆
Do not use a non-Siemens charging unit as this could damage the
batteries.