Gigaset Gigaset 504 AGU Instruction Manual Download Page 8

Page: 8 / 93

The device

LED panel

The LEDs (from left to right) have the following functions:

LED

State

Status

Power

On (green)

The router is connected to the mains.

Flashing

Firmware update is running.

Frequently
flashing

Self-test failure. Device is not bootable or device malfunc-
tion.

Off

The router is disconnected from the mains.

LAN /
LAN1 –
LAN4

A device is connected to the relevant LAN port.

Flashing

The relevant LAN port is sending or receiving data (traffic).

Off

There is no device connected.

USB

On (green)

A device is connected to the router via the USB port.

Flashing

The USB port is sending or receiving data.

Off

There is no device connected.

WLAN

The radio interface is activated, no data transmission at
present.

Flashing

The router is sending or receiving data on the radio inter-
face.

Off

The radio interface is deactivated.

ADSL

A DSL connection is established.

Flashing

The DSL line is being synchronised.

Off

DSL is deactivated.

Online

Connection to the Internet has been established.

Flashing

Data is being sent to or received from the Internet.

Off

There is no Internet connection.

Summary of Contents for Gigaset 504 AGU






























































































Search results

Summary of Contents for Gigaset 504 AGU

Reviews:

Related manuals for Gigaset 504 AGU

Brands by name

Popular brands

Gigaset Gigaset 504 AGU, Instruction Manual

Search results

Summary of Contents for Gigaset 504 AGU

Reviews:

Related manuals for Gigaset 504 AGU

Brands by name

Popular brands