51
Administration
Idle time before log off:
ì
Enter the number of minutes after which the configuration program is to be ended
if no further entry is made. The default is 10 minutes. If you enter 0, the program
will never be ended automatically.
ì
Click
OK
to apply the settings.
System management
Your router Gigaset 504 AGU offers you the option of using remote management in
addition to the configuration program that you access via a PC in your local network.
ì
In the
Advanced Settings
menu, select:
Administration
–
System Management
.
Remote Management enables a PC that is not in your local network to be used to con-
figure the router via a standard Web browser. You can activate Remote Management for
one particular or for any PC.
For security reasons, this function is only available if you have previously changed the
system password for your device (see page 50).
You can start remote management by entering the public IP address in your Internet
browser. As Internet providers often change this each time you dial in, it is also worth
using dynamic DNS (see page 35).
ì
Click the option
On
, to activate
Remote Management
.
ì
You can change the
Port
via which you can access the configuration program from
the Internet, for example in order to mask and protect the configuration program
against unauthorised access.
ì
Access
: You can select
Read only
if you only wish to activate remote management
for reading or you can select
Full control
if you wish to activate it for reading and
writing.
ì
Allowed connections:
You can activate this function for
– One particular PC (
Specify IP address
),
– An range of IP addresses (
Specify IP address range
) or
– Any PC (
Allow all clients
).
