16
Installing the device
Connecting to the mains power supply
ì
Connect the mains adapter cable to the
POWER
socket on the router.
ì
Plug the mains adapter into a mains socket.
ì
Switch on the device.
The router is now switched on and ready for operation.
Checking the operating state
Your router Gigaset 504 AGU is now ready for use. The LED displays on the front panel
of the router provide information about the operating state (see page 8).
When the device is ready for use, the LEDs light up as follows:
u
The
Power
LED on the front lights up.
u
The
ADSL
LED flashes to indicate that the DSL connection is being synchronised.
Once this process is complete, the ADSL LED lights up permanently.
u
The
LAN
LEDs light up if a device is connected to the corresponding LAN port.
u
The
USB
LED lights up if a device is connected to the USB port.
If this is not the case, refer to the section entitled Troubleshooting on (page 62).
Making the basic settings
You can now make the basic settings for Internet access using the user interface of the
router (page 18).
Please remember:
Only use the mains adapter supplied with the device (9 V DC, 1 A).
