Gigaset E560 A User Manual Download

Page: 42 / 64

mplat

, V

ion 1

, 01.

014

/ M

odu

leV

ion 1

Using multiple handsets

Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / extending.fm / 7/14/16

Using multiple handsets

Registering handsets

You can register up to four handsets on the base.

Registering a Gigaset handset manually on the Gigaset E560A

You must register the handset manually on both the handset (1) and the base (2).

After it has registered, the handset returns to idle status.

The registration process is cancelled after 60 seconds. If the handset has not registered within
this time, repeat the process.

1) On the handset

Menu

Settings

Registering

Register Handset

Enter the base system PIN (default setting: 0000

2) On the base

Within 60 seconds, press and

hold

the registration/paging key

on the base (

p. 2) for

approx. 3 seconds.

Registering other handsets

You can register other Gigaset handsets and handsets for other devices with GAP functionality
as follows.

1) On the handset

Start to register the handset as described in its user guide.

2) On the base

Press and

hold

the registration/paging key

on the base (

p. 2) for approx. 3 seconds.

De-registering handsets

You can de-register all other registered handsets from each of the registered handsets.

Menu

Settings

Registering

De-register Handset

Select the internal party(ies) you wish to de-register and press

(The handset you are currently using is indicated by <.)

Enter the current system PIN and press

Press the display key.

Summary of Contents for E560 A

































































Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands

Gigaset E560 A, User Manual

Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands