Gigaset E560 A User Manual Download Page 25

Page: 25 / 64

Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / telephony.fm / 7/14/16

mplat

, V

ion 1

, 01.

014

/ M

odu

leV

ion 1

Directory

Managing directory entries

Select an entry.

Editing entries

Menu

Edit Entry

(Change number if required)

(Change

name if required)

Using other functions

The following functions can be selected with

Menu

Sending the directory to another handset

You can transfer all or individual entries to other handsets

(

p. 23). Transfers can also be made

from old handsets, provided that these are registered to your (new) base.

You can transfer directory entries from other handsets to your new handset – even entries from
old handsets.

(Select entry)

Menu

Send Entry

Send List

(select the

internal number of the receiving handset)

A successful transfer is confirmed by a message and confirmation tone on the receiving handset.

Adding a displayed number to the directory

You can copy numbers displayed in a list, e.g., the call list or redial list, to the directory.

A number is displayed.

Menu

Copy to Directory

Complete the entry (

p. 22).

The message playback is interrupted during the number transfer from the answer machine list.

Show Number

Show number.

Delete Entry

Delete selected entry.

Send Entry

Send a single entry to another handset (

p. 23).

Delete List

Delete

all

directory entries.

Send List

Send the complete list to another handset (

p. 23).

The sending and receiving handsets must both be registered to the same base.

The other handset and the base can send and receive directory entries.

Summary of Contents for E560 A

































































Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands

Gigaset E560 A, User Manual

Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands