25
Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / SOS_function.fm / 7/14/16
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Emergency function
Setting up the emergency function
In order to be able to use the function you must
•
save the emergency numbers and
•
activate the emergency function.
As an optional measure,
you can also record a personal emergency message (e. g. name and
address).
Initially setting up the emergency function
¤
In idle status, press the direct dial key
on the handset.
¤
Activating the emergency function:
Emerg.Call Mode
OK
(
= activated)
You will receive a message stating that an emergency number has not yet been saved. The entry
field for the first emergency number opens.
¤
Enter first emergency number
OK
enter corresponding name
OK
You have the option of entering three further numbers and activating the emergency call to one
or all internal participants:
¤
Further number?
Confirm by pressing
Yes
, if you would like to enter other emergency numbers and then enter
the numbers.
¤
Activate internal call?
Confirm by pressing
Yes
, if you would also like to send a call to all registered handsets as well
as the saved numbers when pressing the emergency key.
¤
Record own name & addr.
Confirm by pressing
Yes
, if you would like to record a message (e. g. name and address),
which will automatically be announced after the participant being called presses the
emergency key. The announcement is played back for you to check.
The display shows
Saved
, press and
hold
the End call key
to return to idle status.
The emergency function is now set up and is automatically activated.
The telephone of the person receiving the emergency call must be set to tone
dialling, otherwise the acceptance of the emergency call using the key 5 is not
recognised.
If you have already assigned the key
for the direct dial, you must first delete this
number (
p. 12). You can then save the emergency number on the direct dial
key
.
•
If your telephone is connected to a PABX, you must enter the access code (outside
line code) as the first digit of your entry, if necessary (
user guide of your PABX).
•
You should carry out a test run to ensure that the emergency function has been
correctly set up. The police, ambulance or fire brigade must not be used for a test
run.
