Gigaset E560 A User Manual Download

Page: 37 / 64

Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / applications_LUG.fm / 7/14/16

mplat

, V

ion 1

, 01.

014

/ M

odu

leV

ion 1

ECO DECT

Further functions

ECO DECT

You are helping to protect the environment with your Gigaset.

Reduced energy consumption

Your telephone has a power-saving adapter plug and uses <0.5 W when in idle status and when
the batteries are not being charged.

Reducing radiation

The radiation from your telephone is reduced

automatically

•

Handset

: The closer the handset is to the base, the lower the radiation.

•

Base:

The radiation is reduced to virtually zero when only one handset is registered and the

handset is placed in the base.

You can reduce the radiation from the handset and the base even more by using

Eco Mode

•

Eco Mode

Reduces the radiation of the base and handset by 80% – whether you are making a call or not.

Eco Mode

reduces the range of the base by approx. 50%. Using

Eco Mode

always makes

sense when a reduced range is sufficient.

Switching off radiation

•

Eco Mode+

When you activate

Eco Mode+

the radiation (DECT transmission power) of base and handset

is switched off automatically and only turns on when calls are made.
This is also true when multiple handsets are used, provided the handsets support

Eco

Mode+.

Eco Mode / Eco Mode+

can be activated/deactivated independently of one another and can

also be used with multiple handsets. The handset need not be placed in the base.

Activating/deactivating Eco Mode / Eco Mode+:

Menu

Settings

System

Eco Mode

Eco Mode+

(

= on).

Status displays

Display icon

Reception strength

– Good to poor

(red)

– No reception

Eco Mode+

enabled (displays instead of the reception strength icon

when in idle status)

Summary of Contents for E560 A

































































Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands

Gigaset E560 A, User Manual

Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands