Gigabyte R283-Z90-AAD1 User Manual Download Page 142

Page: 142 / 184

BIOS Setup

- 144 -

Parameter

Description

Data Link Feature Cap

Enable/Disable the data link feature capability.
Options available: Enabled, Disabled, Auto. Default setting is

Auto

CV test

Enable/Disable the running PCIE CV tool support.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

SEV-SNP Support

Enable/Disable the SEV-SNP support.
Options available: Disable, Enable. Default setting is

Disable

Allow Compliance

When enabled, allows the PCIe RP to enter Polling.Compliance state.
Options available: Auto, Disable, Enable. Default setting is

Auto

SRIS

Options available: Auto, Disable, Enable. Default setting is

Auto

Multi Upstream Auto
Speed Change

Defines the setting of this feature for all PCIe devices.

Options available: Disabled, Enabled, Auto. Default setting is

Auto

Multi Auto Speed Change
On Last Rate

Options available: Disable, Enable, Auto. Default setting is

Auto

PCIE Link Speed
Capability

Options available: Maximum speed, Gen1, Gen2, Gen3, Gen4, Gen5, Auto.
Default setting is

Auto

RTM Margining Support

Options available: Disable, Enable, Auto. Default setting is

Auto

EQ Bypass To Highest
Rate

Options available: Disable, Enable, Auto. Default setting is

Auto

nBif Common Options

Press [Enter] for configuration of advanced items.

Summary of Contents for R283-Z90-AAD1

























































































































































































Search results

Summary of Contents for R283-Z90-AAD1

Reviews:

Related manuals for R283-Z90-AAD1

Brands by name

Popular brands

Gigabyte R283-Z90-AAD1, User Manual

Search results

Summary of Contents for R283-Z90-AAD1

Reviews:

Related manuals for R283-Z90-AAD1

Brands by name

Popular brands