Gigabyte R283-Z90-AAD1, User Manual

Page: 132 / 184

BIOS Setup
- 134 -
DRAM Scrubbers
Press [Enter] to configure advanced items.
Š
DRAM ECS Mode
– Options available: Auto, AutoECS, ManualECS, DisableECS.
Default setting is Auto .
Š
DRAM Redirect Scrubber Enable
– Options available: Auto, Enabled, Disabled. Default setting is
Auto .
Š
DRAM Scrub Redirection Limit
– Options available: Auto, 8 Scrubs, 4 Scrubs, 2 Scrubs, 1 Scrub.
Default setting is Auto .
Š
DRAM Scrub Time
– Options available: Disabled, 1 hour, 4 hours, 6 hours, 8 hours,
12 hours, 16 hours, 24 hours, 48 hours. Default setting is 24
Hours .
Š
DRAM Error Threshold Count
– Options available: Auto, ETC_4, ETC_16, ETC_64, ETC_256,
ETC_1024, ETC_4096. Default setting is Auto .
Š
DRAM ECS Count Mode
– Options available: Auto, Row Count Mode, Code Word Count
Mode. Default setting is Auto .
Š
DRAM AutoEcs during Self Refresh
– Options available: Auto, AutoEcs Disabled, AutoEcs Enabled.
Default setting is Auto .
Š
DRAM ECS WriteBack Suppression
– Options available: Auto, Enable, Disable. Default setting is
Auto .
DRAM Corrected Error Counter
Enabled
Configure DRAM Corrected Error Counter function.
Options available: Disable, NoLeakMode, Leak Mode, Auto. Default
setting is
Leak Mode .
DRAM Corrected Error Counter
Interrupt Enable
Enable SMI when DRAM corrected Error Counter count exceeds the
threshold value.
Options available: Disable, NoLeakMode, Leak Mode, Auto. Default
setting is
Leak Mode .
DRAM Corrected Counter Leak
Rate Program Rate value for DRAM Corrected Error Counter function.
Default setting is
7 .
DRAM Corrected Error Counter
Start Count Program starting value for DRAM Corrected Error Counter function.
Default setting is
FFF5 .