manualshive.com logo in svg

Gigabyte R282-3C0, User Manual, Page: 102 / 118

Share
Download
Gigabyte R282-3C0 User Manual Download Page 102

BIOS Setup

- 102 -

5-4  Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled, Disabled. Default setting is 

Disabled

.

FRB-2 Timer

(Note1)

 

timeout

Configures the FRB2 Timer timeout. The value is between 1 to 30 minutes.

Default setting is 

6 minutes

.

FRB-2 Timer 
Policy

(Note1)

Configures the FRB2 Timer policy.

Options available: Do Nothing, Reset, Power Down, Power Cycle. 
Default setting is 

Do Nothing

.

OS Watchdog 
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

OS Wtd Timer 
Timeout

(Note2)

Configures OS Watchdog Timer. The value is between 1 to 30 minutes.

Default setting is 

10 minutes

.

OS Wtd Timer 
Policy

(Note2)

Configure OS Watchdog Timer Policy.

Options available: Reset, Do Nothing, Power Down, Power Cycle. 
Default setting is 

Reset

.

Wait BMC Ready

POST wait BMC ready and reboot system.
Options available: Disabled, 2 minutes, 4 minutes, 6 minutes. 
Default setting is 

2 minutes

.

(Note1)  This item 

is configurable when

 FRB-2 Timer

 is set to 

Enabled

.

(Note2)  This item 

is configurable when

 OS Watchdog Timer

 is set to 

Enabled

.

Summary of Contents for R282-3C0























































































































Reviews:

No comments