Gigabyte LGA3647 Service Manual Download

Page: 84 / 107

BIOS Setup

- 84 -

5-4 Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is

Disabled

FRB-2 Timer
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is

minutes

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is

Do Nothing

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is

Disabled

OS Wtd Timer
Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is

minutes

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

OS Wtd Timer
Policy

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is

Reset

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

Summary of Contents for LGA3647












































































































Search results

Summary of Contents for LGA3647

Reviews:

Related manuals for LGA3647

Brands by name

Popular brands

Gigabyte LGA3647, Service Manual

Search results

Summary of Contents for LGA3647

Reviews:

Related manuals for LGA3647

Brands by name

Popular brands