Gigabyte LGA3647 Service Manual Download

Page: 71 / 107

- 71 -

BIOS Setup

5-3-5

IIO Configuration

Parameter

Description

IIO Configuration

Intel

VT for Directed I/O (VT-d)

Press [Enter] to configure advanced items.

Intel

VT for Directed I/O (VT-d)

– Enable/Disable the Intel VT for Directed I/O (VT-d) support

function by reporting the I/O device assignment to VMM through
DMAR ACPI Tables.

– Options available: Enable/Disable. Default setting is

Enable

ACS Control

– Enable: Programs ACS only to Chipset Pcie Root Ports Bridges.

– Disable: Programs ACS to all PCIe bridges.

– Default setting is

Enable

Interrupt Remapping

– Enable/Disable the interrupt remapping support function.

– Options available: Enable/Disable. Default setting is

Enable

PassThrough DMA

– Enable/Disable the Non-Isoch VT_D Engine PassThrough DMA

support function.

– Options available: Enable/Disable. Default setting is

Enable

ATS

– Enable/Disable Non-Isoch VT_D Engine ATS support.

– Options available: Enable/Disable. Default setting is

Enable

Summary of Contents for LGA3647












































































































Search results

Summary of Contents for LGA3647

Reviews:

Related manuals for LGA3647

Brands by name

Popular brands

Gigabyte LGA3647, Service Manual

Search results

Summary of Contents for LGA3647

Reviews:

Related manuals for LGA3647

Brands by name

Popular brands