Gigabyte GN-BR02G, User Manual

Page: 71 / 83

GN-BR02G 2.4GHz Wireless Broadband Router
65
Response :
•
Check that the power cord is connected properly, and the
router’s power LED is lit green.
•
Verify that all the TCP/IP configuration settings are correct.
(Problem 1 above)
•
Check that your ADSL/Cable Modem is operating normally,
and/or you have ISP service available.
•
Check that all network cabling is properly connected.
Problem 3:
When I Configure WDS bridging, my Wi-Fi Protected
Access (WPA) security is cancelled.
Response: Wi-Fi Protected Access (WPA) and Wireless Distribution
System (WDS) cannot be used at the same time.
If you need to secure a WDS network, use the Wireless
Encryption Protocol (WEP) feature instead.
If you must use WPA, connect your base stations to a wired
local area network (LAN).