Gigabyte GN-BR02G, User Manual

Page: 32 / 83

GN-BR02G 2.4GHz Wireless Broadband Router
26
include:
•
Dynamic Packet Bursting
• Fast Frames
• Hardware Compression and Encryption
Turbo Mode
Turbo Mode capability operates by using two radio channels instead of just one.
Providing a theoretical 108Mbps transmission. When Turbo mode is set to
enabled, Channel 6 is used and cannot be changed to any other channels.
Super G with Static Turbo
•
Not backwards compatible with non-Turbo (legacy) devices
• Turbo mode is always on
• Only Turbo mode devices can talk to each other, meaning all devices
must be set to Turbo.
Super G with Dynamic Turbo
•
Backwards compatible with non-Turbo (legacy) devices
• Turbo mode only enabled when all nodes on the wireless network is
Super G with Turbo enabled
•
Will drops down from Turbo mode to 11g mode to allow association of
legacy devices.
•
Any wireless device on network not Turbo capable causes entire network
not to be Turbo capable.
Super G without Turbo
Use Super G features but no Turbo Mode
Disabled
Super G Mode is disabled.
Auto Channel Select
The Router uses channel 6 as the default channel. Enabling Auto Channel
Select allows the Router to auto-select a non-conflicting channel.
Channel
The channel may be manually changed (if there are other wireless networks
operating in your area) by selecting a channel from the drop-down list.
SSID
The SSID (Service Set Identifier) is the name of your wireless network. The
SSID is up to 32 ASCII characters in length and case sensitive (i.e. Letters in
upper case “A~Z” and lower case “a~z” are unique). The default SSID is
“GIGABYTE”. To change the SSID, type in the SSID you want to use in the
SSID field and click Submit. If you make a change to the SSID, any wireless
devices on your network must also be reconfigured to connect to the new
network name.
Rate
Select a wireless data transmission rate from the drop- down list. The default