- 43 -
BIOS Setup
tRFC
Options are: Auto (default), 1~255.
tRTP
Options are: Auto (default), 1~15.
tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
Advanced Voltage Settings
>>> CPU
Multi-Steps Load-Line
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
Disabled
Disables Load-Line Calibration and sets VDroop following Intel specifications.
(Default)
Level 1~Level 10 Enables Load-Line Calibration and adjusts VDroop by ten levels.
CPU Vcore
The default is
Auto
.
Dynamic Vcore(DVID)
This option is configurable only when
CPU Vcore
is set to
Normal
. The default is
Auto
.
QPI/Vtt Voltage
The default is
Auto
.
System Agent Voltage
The default is
Auto
.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types
Normal
Current
-----------------------------------------------------------------------------
>>> CPU
Multi-Steps Load-Line
[Disabled]
CPU Vcore
1.220V
[Auto]
x Dynamic Vcore(DVID)
+0.000V
Auto
QPI/Vtt Voltage
1.050V
[Auto]
System Agent Voltage
0.920V
[Auto]
>>> MCH/ICH
CPU PLL
1.800V
[Auto]
>>> DRAM
DRAM Voltage
1.500V
[Auto]
DRAM VRef.
0.750V
[Auto]
DRAM Termination
0.750V
[Auto]
Ch-A Data VRef.
0.750V
[Auto]
Ch-B Data VRef.
0.750V
[Auto]
Ch-A Address VRef.
0.750V
[Auto]
Ch-B Address VRef.
0.750V
[Auto]
higf
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
