Gigabyte GA-Z68X-UD4-B3 User Manual Download Page 66 | Manualshive

Page: 66 / 116

background image

Unique Features

- 66 -

4-2 BIOS Update Utilities

GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash

™

and @BIOS

™

. GIGABYTE

Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS
mode. Additionally, this motherboard features the DualBIOS

™

design, which enhances protection for the

safety and stability of your computer by adding one more physical BIOS chip.

What is DualBIOS

™

?

Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and
a backup BIOS. Normally, the system works on the main BIOS. However, if the

main BIOS is corrupted or damaged, the backup BIOS will take over on the next system boot and copy the
BIOS file to the main BIOS to ensure normal system operation. For the sake of system safety, users cannot
update the backup BIOS manually.

What is Q-Flash

™

?

With Q-Flash you can update the system BIOS without having to enter operating
systems like MS-DOS or Window first. Embedded in the BIOS, the Q-Flash tool

frees you from the hassles of going through complicated BIOS flashing process.

What is @BIOS

™

?

@BIOS allows you to update the system BIOS while in the Windows environ-
ment. @BIOS will download the latest BIOS file from the nearest @BIOS server

site and update the BIOS.

4-2-1 Updating the BIOS with the Q-Flash Utility

A. Before You Begin

1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your moth-

erboard model.

2. Extract the file and save the new BIOS file (e.g. Z68XUD4.F1) to your USB flash drive, or hard drive.

Note: The USB flash drive or hard drive must use FAT32/16/12 file system.

3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can access

Q-Flash by either pressing the <End> key during the POST or pressing the <F8> key in BIOS Setup.
However, if the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to
an independent SATA controller, use the <End> key during the POST to access Q-Flash.

Award Modular BIOS v6.00PG

Copyright (C) 1984-2011, Award Software, Inc.

Z68X-UD4-B3 F2a

.

.

.

.

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

03/21/2011-Z68-7A89VG0TC-00

Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS flashing may
result in system malfunction.

«
...
64
65
66
67
68
...
»

Summary of Contents for GA-Z68X-UD4-B3





















































































































Reviews:

No comments

Related manuals for GA-Z68X-UD4-B3

Brand: Yamaha Pages: 83

Brand: Panasonic Pages: 35

Brand: Intel Pages: 48

870 Extreme3 R2.0

Brand: ASROCK Pages: 17

Brand: DFI Pages: 104

Brand: DFI Pages: 67

Brand: Aaeon Pages: 37

Brand: Gigabyte Pages: 80

Brand: Dynatem Pages: 57

Brand: Intel Pages: 36

LMQ61460EVM-400K

Brand: Texas Instruments Pages: 20

LanParty UT nF3 250 Gd

Brand: DFI Pages: 117

LanParty UT CFX3200-DR

Brand: DFI Pages: 173

Brand: DFI Pages: 123

Brand: Lenovo Pages: 51

FRDMGD3160DCMHB

Brand: SAFEASSURE Pages: 42

Brand: AvaLAN Pages: 14

RouterBOARD 200 Series

Brand: MikroTik Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands