manualshive.com logo in svg

Gigabyte GA-K8NS Ultra-939, User Manual

Share
Download
Gigabyte GA-K8NS Ultra-939 User Manual Download Page 82

- 82 -

GA-K8NS Ultra-939 Motherboard

English

„

nVIDIA System Driver
For nVIDIA chipset driver.

„

USB Patch for WinXP
This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.

„

Marvell 10/100/1000 Base LAN Driver
For Marvell 10/100/1000 LAN chip driver.

„

RealTek AC97 Codec Driver
Realtek audio driver.

„

Silicon Image RAID Driver
Serial-ATA RAID driver for Silicon Image.

„

nVIDIA USB 2.0 Driver
For nVIDIA USB 2.0 enhanced host controller.

Item Description

Driver installation finished !
You have to reboot system !

For USB2.0 driver support under Windows XP operating system, please use Windows Service
Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus
controller" under "Device Manager". Please remove the question mark and restart the system
(System will auto-detect the right USB2.0 driver).

Summary of Contents for GA-K8NS Ultra-939

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands