Gigabyte GA-K8NS Ultra-939 User Manual Download Page 44

Page: 44 / 96

- 44 -

GA-K8NS Ultra-939 Motherboard

English

VIA On-Chip LAN (nVIDIA)

Auto

Auto-detect onboard LAN function. (Default value)

Disabled

Disable onboard LAN function.

Onboard Serial ATA (Onboard SiI3512 chipset)

Enabled

Enable onboard Serial ATA chip function. (Default value)

Disabled

Disable this function.

Serial ATA Function

RAID

Select onboard Serial ATA chip function as RAID. (Default value)

BASE

Select onboard Serial ATA chip function as base.

Onboard 1394

Enabled

Enable onboard IEEE1394 function. (Default value)

Disabled

Disable onboard IEEE1394 function.

Onboard LAN Control

Enabled

Enable onboard LAN chip function. (Default value)

Disabled

Disable onboard LAN chip function.

Onboard LAN Boot ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled

Enable this function.

Disabled

Disable this function. (Default value)

Onboard Serial Port 1

Auto

BIOS will automatically setup the port 1 address.

3F8/IRQ4

Enable onboard Serial port 1 and address is 3F8. (Default value)

2F8/IRQ3

Enable onboard Serial port 1 and address is 2F8.

3E8/IRQ4

Enable onboard Serial port 1 and address is 3E8.

2E8/IRQ3

Enable onboard Serial port 1 and address is 2E8.

Disabled

Disable onboard Serial port 1.

Onboard Serial Port 2

Auto

BIOS will automatically setup the port 2 address.

3F8/IRQ4

Enable onboard Serial port 2 and address is 3F8.

2F8/IRQ3

Enable onboard Serial port 2 and address is 2F8. (Default value)

3E8/IRQ4

Enable onboard Serial port 2 and address is 3E8.

2E8/IRQ3

Enable onboard Serial port 2 and address is 2E8.

Disabled

Disable onboard Serial port 2.

Onboard Parallel Port

378/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default value)

278/IRQ5

Enable onboard LPT port and address is 278/IRQ5.

Disabled

Disable onboard LPT port.

3BC/IRQ7

Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP

Using Parallel port as Standard Parallel Port. (Default value)

EPP

Using Parallel port as Enhanced Parallel Port.

ECP

Using Parallel port as Extended Capabilities Port.

ECP+EPP

Using Parallel port as ECP & EPP mode.

Summary of Contents for GA-K8NS Ultra-939

































































































Search results

Summary of Contents for GA-K8NS Ultra-939

Reviews:

Brands by name

Popular brands

Gigabyte GA-K8NS Ultra-939, User Manual

Search results

Summary of Contents for GA-K8NS Ultra-939

Reviews:

Brands by name

Popular brands