manualshive.com logo in svg

Gigabyte GA-K8NS Ultra-939, User Manual

Share
Download
Gigabyte GA-K8NS Ultra-939 User Manual Download Page 41

BIOS Setup

English

- 41 -

Password Check

System

The system can not boot and can not access to Setup page will be denied if the
correct password is not entered at the prompt.

Setup

The system will boot, but access to Setup will be denied if the correct password
is not entered at the prompt. (Default value)

Felxible AGP 8X

Auto

Automatically set AGP transfer rate according to AGP compatibility and stability.
(Default value)

8X

Always set AGP transfer rate to 8X mode if the 8X mode supported by the AGP card.

4X

Set AGP transfer rate to 4X mode no matter what the AGP transfer rate the card is.

Init Display First

This feature allows you to select the first initiation of the monitor display from which card when you
install an AGP card and a PCI VGA card on the motherboard.

AGP

Set Init display first to AGP. (Default value)

PCI slot

Set Init display first to PCI.

Summary of Contents for GA-K8NS Ultra-939

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands