manualshive.com logo in svg

Gigabyte GA-K8NS Ultra-939, User Manual

Share
Download
Gigabyte GA-K8NS Ultra-939 User Manual Download Page 18

- 18 -

GA-K8NS Ultra-939 Motherboard

English

Step 3: Install Expansion Cards

1. Read the related expansion card's instruction document before install the expansion card into the

computer.

2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.

AGP Card

Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install
/ uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on
the slot. Make sure your AGP card is locked by the small white-drawable bar.

When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non-supported
graphics card is inserted. Informing users that system might not boot up normally due to AGP
2X (3.3V) is not supported by the chipset.

Summary of Contents for GA-K8NS Ultra-939

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands