manualshive.com logo in svg

Gigabyte GA-K8NS Ultra-939, User Manual

Share
Download
Gigabyte GA-K8NS Ultra-939 User Manual Download Page 62

- 62 -

GA-K8NS Ultra-939 Motherboard

English

3. Save BIOS

In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current
BIOS version.

4. Check out supported motherboard and Flash ROM:

In the very beginning, there is "About this program" icon shown in dialog box. It can help you check out
which kind of motherboard and which brand of Flash ROM are supported.

Note:

a. In method I, if it shows two or more motherboard's model names to be selected, please make sure your

motherboard's model name again. Selecting wrong model name will cause the system unbooted.

b. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your motherboard's.

Otherwise, your system won't boot.

c. In method I, if the BIOS file you need cannot be found in @BIOS

™

 server, please go onto Gigabyte's web

site for downloading and updating it according to method II.

d. Please note that any interruption during updating will cause system unbooted.

Summary of Contents for GA-K8NS Ultra-939

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands