manualshive.com logo in svg

Gigabyte GA-K8NS Ultra-939, User Manual

Share
Download
Gigabyte GA-K8NS Ultra-939 User Manual Download Page 72

- 72 -

GA-K8NS Ultra-939 Motherboard

English

2. Press F9 during powering on the computer. (Text Mode)

     Press F9 during  powering on the computer.

Award Modular BIOS v6.00PG, An Energy Star Al ly
Copyright  (C) 1984-2002, Award Software,  Inc.

Intel 865PE AGPSet BIOS for 8IPE1000MT F1
Check System Health OK
.
.
.

Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery
08/16/2002-I845GE-6A69YG01C-00

F9 For Xpress Recovery

Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.

1. Execute Backup Utility
2. Execute Restore Utility
3. Remove Backup Image
4. Set Password
5. Exit and Restart

1.  If you have already entered Xpress Recovery by booting from the CD-ROM, you can

enter Xpress Recovery in the future by pressing the F9 key.

2. System storage capacity as well as drive reading/writing speed will affect backup speed.
3. It is recommended that Xpress Recovery be immediately installed after OS and all

required driver and software installations are complete.

Summary of Contents for GA-K8NS Ultra-939

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands