Gigabyte G292-280 User Manual Download Page 56

Page: 56 / 113

- 57 -

BIOS Setup

Parameter

Description

BIOS Information
Project Name

Displays the project name information.

Project Version

Displays version number of the BIOS setup utility.

Build Date and Time

Displays the date and time when the BIOS setup utility was created.

BMC Information

(Note1)

BMC Firmware Version

(Note1)

Displays BMC firmware version information.

Processor Information
CPU Brand String/

Max CPU Speed

/ CPU Signature / Processor Core /

Microcode Patch

Displays the technical information for the installed processor(s).

Platform Information

Processor/ PCH/ RC Revision

Displays the platform information of the installed processor(s) and
PCH.

Memory Information
Total Memory

(Note2)

Displays the total memory size of the installed memory.

Usable Memory

(Note2)

Displays the usable memory size of the installed memory.

(Note1)  Functions available on selected models..
(Note2)  This section will display capacity and frequency information of the memory that the customer has
  installed.

Summary of Contents for G292-280


















































































































Search results

Summary of Contents for G292-280

Reviews:

Related manuals for G292-280

Brands by name

Popular brands

Gigabyte G292-280, User Manual

Search results

Summary of Contents for G292-280

Reviews:

Related manuals for G292-280

Brands by name

Popular brands