Gigabyte G182-C20 User Manual Download Page 79

Page: 79 / 108

- 39 -

BIOS Setup

Parameter

Description

XFR Enhancement
(continued)

VDDG Voltage Control

– Options available: Auto, Manual. Default setting is

Auto

SoC/Uncore OC Mode

–

Forces CPU SoC/Uncore components (e.g. Infinity Fabric, memory,
and integrated graphics) to run at their maximum specified frequency

at all times. May improve performance at the expense of idle power
savings.

– Options available: Auto, Enabled, Disabled. Default setting is

Auto

LN2 Mode

– Send a message to SMU to help with cold boot and operating under

LN2 conditions for GMI2.

– Options available: Auto, Enabled, Disabled. Default setting is

Auto

ACS Enable

AER must be enabled for ACS enable to work.
Options available: Auto, Enable, Disabled. Default setting is

Auto

PCIe ARI Support

Enable/Disable Alternative Routing-ID Interpretation.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

PCIe ARI Enumeration

Options available: Auto, Enabled, Disabled. Default setting is

Auto

PCIe Ten Bit Tag Support

Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Auto, Enabled, Disabled. Default setting is

Auto

HD Audio Enable

Options available: Auto, Enabled, Disabled. Default setting is

Auto

SMU Common Options

Press [Enter] for configuration of advanced items.

cTDP Control

– Selects use the fused TDP or set customized TDP. **TDP is used to

define the RC thermal model only**

– Options available: Auto, Manual. Default setting is

Auto

Fan Control

– Fan Table Control

Options available: Auto, Manual. Default setting is

Auto

EfficiencyModeEn

– Options available: Auto, Enabled. Default setting is

Auto

Package Power Limit Control

– Selects use the fused PPT or set customized PPT. **PPT will be used

as the ASIC power limit**

– Options available: Auto, Manual. Default setting is

Auto

APBDIS

– Options available: Auto, 0, 1. Default setting is

Auto

DF Cstates

– Enable/Disable DF C-states.

– Options available: Auto, Enabled, Disabled. Default setting is

Auto

CPPC

– Options available: Auto, Enabled, Disabled. Default setting is

Auto

Summary of Contents for G182-C20













































































































Search results

Summary of Contents for G182-C20

Reviews:

Brands by name

Popular brands

Gigabyte G182-C20, User Manual

Search results

Summary of Contents for G182-C20

Reviews:

Brands by name

Popular brands