manualshive.com logo in svg

Gigabyte G182-C20, User Manual

Share
Download
Gigabyte G182-C20 User Manual Download Page 58

BIOS Setup

- 58 -

5-2-8 

USB Configuration

(Note)  This item is present only if you attach USB devices.

Parameter

Description

USB Configuration

USB Module Version

Displays the USB module version information.

USB Controllers

Displays the supported USB controllers.

USB Devices:

Displays the USB devices connected to the system.

Legacy USB Support

Enable/Disable the Legacy USB support function. AUTO option 
disables legacy support if no USB devices are connected. 
DISABLE option will keep USB devices available only for EFI 
applications.
Options available: Auto, Enabled, Disabled. Default setting is 

Enabled

.

XHCI Hand-off

Enable/Disable the XHCI Hand-off support. 
Options available: Enabled, Disabled. Default setting is 

Enabled

.

USB Mass Storage Driver 
Support

(Note)

Enable/Disable the USB Mass Storage Driver Support.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Summary of Contents for G182-C20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands