manualshive.com logo in svg

Gigabyte G182-C20, User Manual

Share
Download
Gigabyte G182-C20 User Manual Download Page 45

- 39 -

BIOS Setup

5-2-1  Trusted Computing

Parameter

Description

TPM20 Device Found
Firmware Version

Displays the firmware version information.

Vendor

Displays the vendor information.

Security Device Support

Enable/Disable BIOS support for security device. OS will not show 
security device. TCG EFI protocol and INT1A interface will not be 
available.
Options available: Enable, Disable. Default setting is 

Enable

.

SPI TPM Support

Enable/Disable SPI TPM Support.
Options available: Enable, Disable. Default setting is 

Disable

.

Active PCR banks

Displays active Platform Configuration Register (PCR) banks.

Available PCR banks

Displays available PCR banks.

SHA-1 PCR Bank

Enable/Disable SHA-1 PCR bank.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

SHA256 PCR Bank

Enable/Disable SHA256 PCR bank.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Summary of Contents for G182-C20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands