manualshive.com logo in svg

Gigabyte G182-C20, User Manual

Share
Download
Gigabyte G182-C20 User Manual Download Page 69

- 39 -

BIOS Setup

Parameter

Description

Link
(continued) 

 

Š

xGMI TXEQ Mode

 

–

Configures xGMI TXEQ/RX vetting Mode.

 

– Options available: Auto, TXEQ_Disabled, TXEQ_Lane, TXEQ_Link, 

TXEQ_RX_Vet.  Default setting is 

Auto

.

Disable DF to external 
downstream IP
SyncFloodPropagation

Enable/Disable SyncFlood to UMC & downstream slaves.

Options available: Auto, Sync flood disabled, Sync flood enabled. 

Default setting is 

Auto

.

Disable DF sync flood 

propagation

Enable/Disable DF Sync Flood propagation.

Options available: Auto, Sync flood disabled, Sync flood enabled. 

Default setting is 

Auto

.

Freeze DF module queues on 
error

Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

CC6 memory region encryption

Controls whether or not the CC6 save/restor memory is encrypted.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

System probe filter

Enable/Disable System probe filter.

Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Memory Clear

Enable/Disable the Memory Clear feature.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

PSP error injection support

Enable/Disable PSP error injection support.
Options available: False, True. Default setting is 

False

.

Summary of Contents for G182-C20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands