manualshive.com logo in svg

Giga-tronics 2508A, Operation Manual

Share
Download
Giga-tronics 2508A Operation Manual Download Page 69

2500A Series Operation Manual, 34172 Revision C, March 2008

Remote Operation

3.1

Introduction

The 2500A and 2500AS Series can be operated from a remote host over the General Purpose Interface 
Bus (GPIB) or RS-232 interface using the Automation Xpress software and Automation Xpress Interface 
(AXI) from Gigatronics. For further information, refer to the Automation Xpress online help system.

The instrument can also be programmed using either Standard Commands for Programmable Instru-
ments (SCPI) or any of the available command sets. 

3.1.1

What is Automation Xpress?

Automation Xpress is an easy to use application development tool for use with 2500A Series instru-
ments.  Automation Xpress is the preferred method of using the 2500A in remote operation.

Automation Xpress eliminates the need to learn the various GPIB or native language commands. With a 
click of the mouse, the Automation Xpress Auto-Programming feature automatically records the 
sequence of your actions performed in the Automation Xpress GUI and converts those actions into pro-
gram code. Auto-programming provides the option of seamlessly converting recorded action sequences 
into generated programs that can be imported into the program environment of your choice, such as 
Visual C++ or Visual Basic.

The key to reducing the cost of testing is faster frequency switching. The 2500A Series Microwave Syn-
thesizer offers unmatched frequency and power switching in list mode; however, the list mode approach 
might not be suitable for some remote programming situations. Automation Xpress combined with the 
Automation Xpress Interface ensures unmatched 2.5 ms CW frequency and power switching perfor-
mance, providing fast and flexible data exchange rates for faster testing and more device throughput. The 
transit and execution times for single function calls, such as changing CW frequency, are ten times faster 
than sending the command via standard message based commands. With Automation Xpress sending 
large amounts of data such as large lists, the transit and execution times are greater than 100 times faster 
compared to SCPI. This makes lengthy and repetitive tasks faster and more efficient, maximizing test 
throughput, while minimizing testing time and system downtime.

Automation Xpress also provides the tools necessary to successfully program the 2500A series. The 
Xpress Auto-programmer can virtually eliminate the need for training, providing programming scripts 
and sequences that are guaranteed for accuracy.

3

Summary of Contents for 2508A





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands