manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, User Manual, Page: 89 / 136

Share
Download
GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 User Manual Download Page 89

- 89 -

Unique Features

Step 2:
The screen will show that the BIOS file is being read from your USB flash drive. Please select 

Fast

 or 

Intact

 to 

begin the BIOS update. The screen will then display the update process.

Step 3:
The system will restart after the update process is complete.

 

•

Do not turn off or restart the system when the system is reading/updating the BIOS.

 

•

Do not remove the USB flash drive or hard drive when the system is updating the BIOS.

Step 4:
During the POST, press <Delete> to enter BIOS Setup. Select 

Load Optimized Defaults

 on the 

Save & Exit

 

screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, 
so we recommend that you reload BIOS defaults.

Step 5:
Select 

Save & Exit Setup

 and press <Enter>. And then select 

Yes

 to save settings to CMOS and exit BIOS 

Setup. The procedure is complete after the system restarts.

Select 

Yes

 to load BIOS defaults

Summary of Contents for GA-Z270X-UD5









































































































































Reviews:

No comments