manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, User Manual, Page: 108 / 136

Share
Download
GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 User Manual Download Page 108

Unique Features

- 108 -

(Note) 

PEG ASPM,  PCH ASPM,  DMI ASPM  Control

  are  configurable  only  when 

Platform  Power 

Management 

is set to 

Enabled

.

5-2-11  Platform Power Management

This application allows you to change the Platform Power Management settings in Windows and sync the 
settings to the BIOS.

The Platform Power Management Interface

Using Platform Power Management:

 

•

Platform Power Management:

  Enables or disables the Active State Power Management function (ASPM).

 

•

PEG ASPM:

  Allows you to configure the ASPM mode for the device connected to the CPU PEG bus.

 

•

PCH ASPM:

  Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus.

 

•

DMI ASPM Control:

  Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link.

Summary of Contents for GA-Z270X-UD5









































































































































Reviews:

No comments