manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, User Manual, Page: 104 / 136

Share
Download
GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 User Manual Download Page 104

Unique Features

- 104 -

EZ Smart Response

A. System Requirements

1.  An Intel

®

 Chipset-based motherboard supporting this feature

2.  Intel

®

 Core series processor

3.  Intel

®

 SATA controllers set to RAID mode

4.  Intel

®

 Rapid Storage Technology utility installed

 (Note 1)

5.  A conventional SATA disk and an SSD

 (Note 2)

6.  Windows 7 with SP1/Windows 8.1/Windows 10

 (Note 3)

B. Using EZ Smart Response

Select 

EZ Smart Response

 and click 

Create

.

To disable this function, click 

Delete

.

If you have installed the operating system before configuring the Smart Response Technology, all 
original data on the SSD will be lost once you enable RAID mode

 (Note 4)

. It is recommended that you 

back up the hard disk before enabling the Smart Response Technology.

(Note 1)  Before start, make sure you have installed the Intel

®

 Rapid Storage Technology utility (version 14.5 

or above).

(Note 2)  The SSD works as a cache of the hard disk. The maximum cache memory size is 64 GB. If you use 

an SSD larger than 64 GB, the space beyond 64 GB can still be used for storing your data.

(Note 3)  The operating system must be installed to the SATA disk.
(Note 4)  If the SATA controllers are set to AHCI mode in BIOS Setup, they will be forced to RAID mode.

Summary of Contents for GA-Z270X-UD5









































































































































Reviews:

No comments