GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 User Manual Download Page 13

Page: 13 / 136

- 13 -

Hardware Installation

Unique Features

- Smart TimeLock

- System Information Viewer

- USB Blocker

- V-Tuner

Support for 3TB+ Unlock

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton

Internet Security (OEM version)

Intel

Optane

™

Memory Ready

cFosSpeed

Operating

System

Support for Windows 10/8.1 64-bit

Support for Windows 7 64-bit/32-bit

* Operating systems supported may vary depending on your processor model.

* Please download the "Windows USB Installation Tool" from GIGABYTE's website

and install it before installing Windows 7.

Form Factor

ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTE reserves the right to make any changes to the product speci

ﬁ

cations and product-related information without

prior notice.

Please visit GIGABYTE's website for support lists of CPU, memory modules, SSDs, M.2, and

U.2 devices.

Please visit the

Support\Utility List

page on GIGABYTE's website to download the latest

version of apps.

Summary of Contents for GA-Z270X-UD5









































































































































Search results

Summary of Contents for GA-Z270X-UD5

Reviews:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, User Manual, Page: 13 / 136

Search results

Summary of Contents for GA-Z270X-UD5

Reviews: