GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 User Manual Download Page 128

Page: 128 / 136

Appendix

- 128 -

Code

Description

USB device hot plug-in.

PCI device hot plug.

Clean-up of NVRAM.

Reconfigure NVRAM settings.

B8~BF

Reserved.

C0~CF

Reserved.

Code

Description

S3 Resume is started (called from DXE IPL).

Fill boot script data for S3 resume.

Initializes VGA for S3 resume.

OS S3 wake vector call.

S3 Resume

Code

Description

Recovery mode will be triggered due to invalid firmware volume detection.

Recovery mode will be triggered by user decision.

Recovery is started.

Recovery firmware image is found.

Recovery firmware image is loaded.

F5~F7

Reserved for future AMI progress codes.

Recovery

Code

Description

50~55

Memory initialization error occurs.

Invalid CPU type or speed.

CPU mismatch.

CPU self test failed or possible CPU cache error.

CPU micro-code is not found or micro-code update is failed.

Internal CPU error.

Reset PPI is failed.

5C~5F

Reserved.

CPU initialization error.

IOH initialization error.

Error

Summary of Contents for GA-Z270X-UD5









































































































































Search results

Summary of Contents for GA-Z270X-UD5

Reviews:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, User Manual, Page: 128 / 136

Search results

Summary of Contents for GA-Z270X-UD5

Reviews: