manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, User Manual, Page: 88 / 136

Share
Download
GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 User Manual Download Page 88

Unique Features

- 88 -

Select 

Q-Flash

 to access Q-Flash

B. Updating the BIOS

In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS, 
choose the location where the BIOS file is saved. The following procedure assumes that you have saved the 
BIOS file to a USB flash drive.

Step 1:
1.  Insert the USB flash drive containing the BIOS file into the computer. In the main screen of Q-Flash, select 

Update BIOS

.

 

•

The 

Save BIOS

 option allows you to save the current BIOS file.

 

•

Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.

 

•

If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached 
to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

2.  Select the BIOS update file.

Make sure the BIOS update file matches your motherboard model.

Summary of Contents for GA-Z270X-UD5









































































































































Reviews:

No comments