The manual unlocking device is situated on the support bracket of the gate and allows unlocking the gate both from
the inside and the outside of the property.
To manually open the gate, operate as follows:
[
]
• Uncover the lock sliding off the protective cap as shown in
22
.
[
]
• Insert the unlocking key in the lock
22
and turn it.
• Pull the lever towards you and manually move the leaf.
• Turn the key for an additional 180° and remove it from the lock.
WARNING: it is essential that the key is turned for at least 180° during the manual operation.
To restore normal operation, act as follows
[
]
• Strip the lock sliding the protection as in
22
.
[
]
• Insert the unlocking key in the lock
22
and turn it for 180°.
• Manually move the leaf until the lock couples on the locking bracket.
• Take the key back to its original position and remove it.
• Close the protective lock sliding cap.
:
It is recommended to use an electric lock for leaves larger than 2.5 m and in any case for blind or flush panel doors
À
ELECTRIC LOCK
Á
ELECTRIC LOCK FASTENING PLATE
Â
LATCH COUPLING
Ã
ND-STOP FOR LATCH COUPLING
Ä
LATCH
Å
THROUGH CYLINDER (ON REQUEST)
Æ
GATE
.
Power the system and run a complete opening and closing cycle checking that
• The safety devices function properly;
• The gate moves smoothly;
• The solidity of the foundation plate;
• The gate assembly conforms to
EN 12453
and
EN 12445
.
•
For further details and information on the reference standards, visit our website:
www.gibidi.com
:
RESTORING NORMAL OPERATION
[
] [
]
FITTING THE ELECTRIC LOCK
24
-
25
FINAL TESTING
GROUND
23
Summary of Contents for GROUND 610
