GiBiDi AS05800, Instructions For Installation Manual

Page: 33 / 56

32 33
SC380 SC380
UK UK
18 - MENU DESCRIPTION
WARNING:
The DEFAULT settings are in grey spaces
18.1 - DESCRIPTION MENU ( A )
Menu Function Description
2
A 1
TYPE OF
INSTALLATION
Status
It configures the system for swing gate.
With this configuration:
Ÿ
the electronic brake is automatically excluded.
It configures the system for sliding gate
With this configuration it will be automatically:
Ÿ
Ÿ
excluded the water hammer.
Ÿ
excluded the final stroke.
Ÿ
excluded the hydraulic block maintenance.
Ÿ
active the limit switch reading.
IMPORTANT: Menus C4, C10, C11, C13 are not visible any
more.
active the electronic brake.
3
A 3
STEP BY STEP
WITH STOP
LOGIC
2
It enables the STEP BY STEP WITH STOP Logic
Operation after a START command :
Ÿ
Close gate OPEN
→
Ÿ
During opening STOP
→
Ÿ
Open gate CLOSE
→
Ÿ
During closing STOP
→
Ÿ
After a STOP invert the motion
→
Configures the installation for rising bollard using the
additional control unit BX-6M (AS07010).
With this configuration il will be automatically:
excluded the electronic brake.
excluded the water hammer.
excluded the final stroke.
disabled the limit switch reading.
WARNING:
Menus A3_5, A5_2, A5_4 C4, C10, C11, C15, C23, H10,
H11, E5, E9, E32, E34, E36 are not visible any more.
Refer to the manual of the control unit BX-6M (As07010)
and chapter 21 of this manual.
4
18.1 - DESCRIPTION MENU ( A )
Menu Function Description Status
5
DEAD MAN LOGIC
It enables the DEAD MAN Logic
Operation:
Ÿ
OPENING
→
opens only if you keep the OPENING
button pressed.
Ÿ
CLOSING
→
closes only if you keep the CLOSING
button pressed.
A 3
It disables the automatic closing.
I n pause (open gate):
Ÿ
START will cause the closing.
Ÿ
The CLOSING button will activate the closing.
1
AUTOMATIC CLOSING
A 5
It enables:
Ÿ
the total automatic closing (See Menu H9)
Ÿ
the pedestrian automatic closing (See Menu H11)
2
It enables only the total automatic closing
(See Menu H9)
3
It enables only the pedestrian automatic closing
(See Menu H11)
4
STEP BY STEP LOGIC
3
It enables the STEP BY STEP Logic
Operation after a START command:
Ÿ
Close gate OPEN
→
Ÿ
During opening CLOSE
→
Ÿ
Open gate CLOSE
→
Ÿ
During closing OPEN
→
AUTOMATIC
CONDOMINIUM LOGIC
4
It enables the AUTOMATIC Logic
Operation after a START command:
Ÿ
Close gate OPEN
→
Ÿ
During opening IRRELEVANT
→
Ÿ
Open gate Reloads the automatic closing
→
time if the automatic reclosing is
enabled, otherwise it closes.
Ÿ
During closing OPEN
→