Giant MY20, Service Manual

Page: 30 / 106

30
THE FIRST CHARGE (ALL ENERGYPAKS)
All new bikes have an EnergyPak that arrives in so-called ‘hibernate state’. Delivering the EnergyPaks in a hibernate
state is done in order to maintain the quality of the EnergyPak before first use. These EnergyPaks are charged to ap-
proximately 60%. Pushing the button on a hibernate state EnergyPak results in no LED blinking. A hibernate state
EnergyPak has an output power of 0 Volt.
Waking up these new hibernate EnergyPaks can be done by simply charging the battery until it is fully charged. After this
initial charging, the EnergyPak can be used as normal. It is not possible (not even by accident) to get a used EnergyPak
back into hibernate state.
ENERGYPAK RANGE TABLE
SYNCDRIVE LIFE SYNCDRIVE SPORT SYNCDRIVE PRO
ENERGYPAK MODE RANGE (KM) MODE RANGE (KM) MODE RANGE (KM)
500WH
Integrated (MY19)
244M36500I-01V
Smart (MY20)
244M36500I-03V
Eco
75 150
Eco
75 150
Eco
65 110
Eco+
65 110
Eco+
65 110
Basic
40 85
Normal
45 90
Normal
40 85
Active
25 60
Sport
35 70
Sport
25 60
Sport
20 55
Sport+
25 55
Sport+
20 50
Power
15 45
400WH
Eco
60 120
Eco
60 120
Eco
50 90
Eco+
50 90
Eco+
50 90
Basic
30 60
Normal
35 65
Normal
30 60
Active
20 45
Sport
25 55
Sport
20 45
Sport
15 40
Sport+
20 45
Sport+
15 35
Power
10 35
375WH
Eco 56 113 Eco 56 113 Eco 47 84
Eco+
47 84
Eco+
44 79
Basic
26 53
Normal
33 61
Normal
25 49
Active
16 37
Sport
23 52
Sport
15 35
Sport
12 31
Sport+
19 42
Sport+
11 25
Power
7 25
300WH
Eco
45 90
Eco
45 90
Eco
35 75
Eco+
35 75
Eco+
35 75
Basic
25 55
Normal 30 60 Normal 25 55 Active 15 35
Sport
20 45
Sport
15 35
Sport
10 30
Sport+
15 35
Sport+
10 30
Power
10 25