Giant MY20, Service Manual

Page: 50 / 106

50
12
Loosen the bolt at the rear right side of the motor, using a Torx 30 tool,
do not remove the bolt
13
Remove the bolt at the front right side of the motor, using a Torx 30 tool
14
Remove the bolt at the front left side of the motor, using a Torx 30 tool
15
Loosen the bolt at the rear left side of the motor, using a Torx 30 tool, do
not remove the bolt
16
With the rear motor bolts acting as a hinge, lower the motor as far as it
will go.
17
Disconnect the connector of the speed sensor.
Pull connectors, do not pull wires.