GI.BI.DI AS05581, Installation Instructions Manual

Page: 54 / 60

BA230
54
UK UK
Select the menu C21 to enter this procedure. (menu C21 blinking)
The times learning procedure starts by pressing OK (menu C21-AUTO)
The microcontroller does not consider fractions of times of less than 1 second, so the real time is rounded up or
down.
The times set following this procedure can be modified later by entering the proper menus and modifying the
numeric value.
If the instalment is configured as double sliding, the motors will move as indicated in the procedure with the
phase shift in opening and closing.
During normal working, phase shifts are zeroed.
1 motor configuration
• START → the leaf starts opening.
• When the leaf arrives at the desired opening position
→
START
→
the leaf stops.
• Counting of the pause time in opening starts.
• When the desired pause time has elapsed
→ START → the leaf starts closing.
• When the leaf arrives at the closing position
→
START
→
the leaf stops.
• Now the procedure has finished, the menu C21 reappears blinking
• If you want to repeat the operation, press OK
• If you want to finish the times learning operation and save the data, press ESC as long as the horizontal lines
appear on the display
2 motors configuration
• START
→
leaf 1 starts opening.
• START → leaf 2 starts opening
• When leaf 1 arrives at the desired opening position → START → leaf 1 stops.
• When leaf 2 arrives at the desired opening position
→
START
→
leaf 2 stops.
• Counting of the pause time in opening starts.
• When the desired pause time has elapsed
→ START → leaf 2 starts closing.
• START → Leaf 1 starts closing. (phase shift time setting)
• When leaf 2 arrives at the closing position
→
START
→
leaf 2 stops.
• When leaf 1 arrives at the closing position → START → leaf 1 stops.
• Now the procedure is over, the menu C21 reappears blinking
• If you want to repeat the operation, press OK
• If you want to finish the times learning operation and save the data, press ESC as long as the horizontal lines
appear on the display