GGS-Data Style-Note 874xTG, User Manual

Page: 124 / 216

Modules & Options
7 - 16 3.75G/HSPA Module
7
3.75G/HSPA Module
If you have included an optional 3.75G / HSPA (High Speed Packet Access) module
(see “Communication” on page C - 3 for specification details) in your purchase op-
tion, you will have the appropriate software provided for your module. Follow the
instructions overleaf to install the USIM card (supplied by your service provider),
and then install the appropriate application.
Before installing the application , make sure that the 3.75G/HSPA module is on.
Use the Fn+ ( ) key combination (see Table 1 - 4, on page 1 - 13 ) to toggle power
to the 3.75G/HSPA module . Make sure you install the drivers in the order indicated
in Table 4 - 1, on page 4 - 3 .
3.75G/HSPA Module
Options
There are two optional
3.75G/HSPA modules
available for this series
of computer models.
Each module is supplied
with the appropriate ap-
plication software.
The module type sup-
plied may depend upon
the computer model pur-
chased. Check with your
service center for de-
tails.
Install the driver from
the Drivers Installer
menu and check the in-
structions for the appro-
priate application on the
following pages.
Important Notice - 3.75G/HSPA & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3.75G/HSPA module
and the Bluetooth/Wireless LAN modules at the same time as this may disrupt radio fre-
quency, and cause interference. When the 3.75G/HSPA module is powered on, make sure
that the Bluetooth/Wireless LAN modules are powered off.