25
7
Setting the final limit positions
The following explains how to set the final limit positions of the
door at the initial commissioning.
If you have already connected a safety edge, the pre-limit is
automatically set with the final limit positions.
You can correct the final limit positions later with menu items
1. 1
-
P 1.4
.
You can correct the final limit position of the safety edge’s pre-limit
with menu item
1.5
.
Setting the final limit positions
1. Turn on power:
▪
Turn on the power using the main switch for the following steps.
2. Checking the output rotating direction:
▪
Press the OPEN button.
▪
If the door moves upwards, the output rotating direction is
correct. Proceed with step
4
.
▪
If the door moves downwards, change the output rotating
direction. Proceed with step
3
.
3. Changing the output rotating direction:
Carry out this step only if the door moves downwards after step
1
.
▪
Press the OPEN and CLOSE buttons simultaneously for 3
seconds. The display changes as shown in the figure.
