21
X6: Photocell
You can connect a reflective or through beam photocell to
terminals X6.1/X6.2 as well as 24V and GND.
Use only photocells of mode „light switching“.
To operate a photocell at the door, select option
.3, .4, 1.3
or
1.4
under menu item
0.1
(operating mode).
You can set further photocell functions under
menu item
2.4
.
▪
Install the product according to the manufacturer‘s instructions.
▪
Several examples of photocells are shown. Connect your
product accordingly.
▪
After completion of the electrical installation, activate the
photocell with menu item
0.1
(operating mode).
Reflective photocell
Through beam photocell I Through Beam photocell II
When the photocell is activated, fault indication
F 2.1
appears.