9
5.1 Fuses
The door control has four fuses. Fuses F1 to F3 are motor
fuses. Fuse F4 is the control fuse.
Risk of fire!
Fuse F4 must have a current value of 500 mA. Otherwise, the
function of the fuse is not given.
The current value of fuses F1-F3 is 20 A.
Replacing fuses
▪
Remove the terminal cover.
▪
Remove the fuse sleeve.
▪
Insert the fuse into the fuse sleeve.
▪ Screw in the fuse sleeve finger tight.
▪
Install the terminal cover. Tighten the screws by hand.
5.2 Connecting limit switch to the door control
The following explains how to connect the digital limit switch
(DES) of the door drive unit to the door control. For this you
need the DES connecting cable (part no. 30005773).
1. Attaching the DES connecting cable
▪
Remove the limit switch cover of the door drive unit. Please
refer to the installation instructions of the door drive unit.
▪
A: Connect the plug (1) of the DES connection cable to the
slot on the DES (2).
▪
B (FI-door drives): Connect the plug (1) of the DES
connection cable to the connection cable of the DES.
