13
Signet 2580 FlowtraMag Meter
No calibration is necessary to begin using the 2580. The application and performance settings are pre-set to meet the
requirements of most applications. The FlowtraMag is shipped from the factory with the following calibration:
FlowtraMag
Model Number
K-Factor
pulse/L
K-Factor
pulse/Gal
Flow Rate
@20 mA L/min
Flow Rate
@20 mA Gal/min
3-2580-P-T-010
225.264
852.716
266.35
70.363
3-2580-P-T-020
53.9278
204.139
1112.6
293.92
3-2580-P-T-040
13.7683
52.1188
4357.8
1151.2
For customization and performance settings, use the GF Confi g Tool App or the Signet 0252 Confi guration Tool and software.
Refer to the Signet 0252 Confi guration Tool manual for details to adjust the following parameters:
4 to 20 mA span
: Factory setting is 4 mA = 0, and 20 mA = 10 m/s (32.8 ft/sec) equivalent fl ow rate, refer to the calibration
table, and can also be customized to any range. The 4 to 20 mA span sets the LED bar graph span.
Low Flow Cutoff
: Factory setting is 0.02 m/s (0.07 ft/s) equivalent fl ow rate, and can be customized to any user preferences.
Averaging Time
:
Factory setting is Low. Can be customized: Off , Low, Med, High.
Sensitivity
:
Factory setting is 0.5 m/s (1.64 ft/s) equivalent fl ow rate, and can be customized to user preferences.
Calibration
Customization and Performance Settings
Application Note:
The unit is factory calibrated for
recommended setup.
See calibration certifi cate for
complete details.
User has the option to
custom calibrate based on
their application.
USB
Windows PC
GND
Data
3-0252
2580
Output cable
Black
Brown
Shield
Blue not used
Not used
Ground (White)
Data (Red)
Bluetooth
®
set to S³L
Change Language
Currently English and Chinese are available in the App.
iOS device without home button
Swipe up from the bottom. Find the minimized
App and swipe up to close the app to clear the
App Cache.
iOS device with home button
Double click the home button. Find the minimized
app and swipe up to close the app to clear the App
Cache.
Android
When you select your language of choice, it automatically
changes. No other steps are needed.
