Slimdrive SL NT product family
6
About this document
3
About this document
These instructions describe the pre-mounting of the automatic sliding door drives of the Slimdrive SL NT product
family.
4
Overview
4.1 Diagrams
Number
Type
Name
70511-0-001
Drive drawing
GEZE Slimdrive SL NT, drives
70511-2-0200
Component drawing
Cover, bespoke
70511-2-0209
Component drawing
Track, bespoke, SL NT
70511-2-0231
Component drawing
Track, drilled, SL NT
70511-2-0281
Component drawing
Track, bespoke, SL NT 2-leaf, GGS with fixed panels
70511-2-0282
Component drawing
Track, bespoke, SL NT 1-leaf, left hand slide to open,
GGS with fixed panel
70511-2-0283
Component drawing
Track, bespoke, SL NT 1-leaf, right hand slide to open,
GGS with fixed panel
70511-2-0228
Component drawing
Connecting profile roller carriage
70511-1-0107
Component drawing
Module mount right, DCU1-NT, SL NT
70511-1-0108
Component drawing
Module mount right, SL NT -FR 2M/-FR DUO
70511-1-0109
Component drawing
Module mount right, SL NT -FR LL/ -FR RWS
70511-1-0106
Component drawing
Module mount left SL NT and locking mechanism
70511-1-0117
Component drawing
Module mount left, SL NT
The diagrams are subject to change without notice. Use only the most recent version.
4.2 Tools and aids
Tool
Size
Tape measure
Marking pen
Torque spanner
Allen key
2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
Open-ended spanner
8 mm, 10 mm, 13 mm, 15 mm
Ring spanner
8 mm, 10 mm
Screwdriver set
Slotted up to 6 mm, cross-slot PH2 and PZ2
Torx key
Tx 20 (bit insert length at least 110 mm)
Side-cutting pliers
Crimping pliers for cables
Wire stripper
Plastic bottle as tip safeguard
Display programme switch DCU1/Service terminal ST220/GEZEconnects
4.3 Torques
The torques are given at the respective installation step.
