Slimdrive SL NT product family
5
Fundamental safety precautions
2.3 Safety-conscious working
à
Secure workplace against unauthorised entry.
à
Use only the cables specified on the cable plan provided. Cables must be shielded in compliance with
the wiring diagram.
à
Secure loose, internal drive cables with cable ties.
à
Before working on the electrical system:
à
Disconnect the drive from the 230 V mains and secure it against being switched back on again. Check isola-
tion from power supply.
à
Disconnect the control unit from the 24 V rechargeable battery.
à
When an Uninterruptible Power Supply (UPS) is used, the system will still be under voltage even when discon-
nected from the mains.
à
Always use insulated wire-end ferrules for wire cores.
à
Make sure of sufficient lighting.
à
Danger of injury with opened drive. Hair, clothing, cables, etc. can be drawn in by rotating parts.
à
Danger of injury caused by unsecured crushing, impact, drawing-in or shearing spots.
à
Danger of injury due to sharp edges on the drive and door leaf.
à
Danger of injury during installation through freely moving parts.
2.4 Environmentally conscious working
à
When disposing of the door system, separate the different materials and have them recycled.
à
Do not dispose of batteries and rechargeable batteries with household waste.
à
Comply with the statutory regulations when disposing of the door system and the batteries/
rechargeable batteries.
2.5 Safety instructions related to transportation and storage
X
Do not throw, do not drop.
X
Avoid heavy impact.
à
Storage temperatures under –30 °C and above +60 °C can result in damage to the device.
à
Protect against humidity.
à
Dry, well ventilated, closed, weather-proof and UV-protected rooms are suitable as storage areas.
2.6 Qualification
Observe country-specific regulations!
Applicable in Germany:
Companies which carry out the pre-mounting of sliding door drives for escape routes must be approved as an
extended production facility by the testing institute which issued the type approval certificate.
