Slimdrive SL NT product family
9
Pre-mounting
5.4 Connecting the contact on the tooth belt lock (optional)
X
Remove screws (2) on the feedback switch (1) of
the tooth belt locking mechanism.
X
Place the alarm contact switch (3) on the feed-
back switch (1).
X
Fix both switches in place on the tooth belt
locking mechanism using the longer screw (2)
from the retrofit kit.
X
Connect the cable for the tooth belt locking
mechanism.
X
Shorten the switching lug of the alarm contact
switch.
5.5 Mounting the module mount
5.5.1 Mounting the left-hand module mount
X
Mount the left-hand module mount as shown in the drawing.
Module mount left with locking mechanism
The module mount shown here has been chosen as an example. The installation dimensions of the module
mount you are using can be found on the respective component drawing (see Chapter 4.1).
X
Slide the sliding blocks into the module mount.
X
Mount the components with the screws provided in accordance with the drawing.
à
Tightening torque deflection pulley approx. 15 Nm
à
Tightening torque remaining components 10 Nm
